boundary="------------BA9A639D216FD71F0FD37559" ****************************************************************************** dorismail 25-Sep-2023 07:47:15 Message No 1366 ****************************************************************************** Author: Manuela Seitz Subject: DTRF2020 release update to Version v2 This is a multi-part message in MIME format. --------------BA9A639D216FD71F0FD37559 Dear colleagues, today we re-upload some files provided together with DTRF2020. Please find the new files in the DTRF2020 release version v2 under the current Zenodo link _https://zenodo.org/record/8220523 _ The DTRF2020 solution and all other files not commented below remain unchanged. *The updated/corrected files are:* 1) non-tidal loading (NTL) time series  referring to CM and CF and the files listing the offsets and trends by which the time series are reduced.     filenames:     NTL_{CF|CM}_${technique}_{neu|xyz}.tar     NTL_{CF|CM}_${technique}_reduced_offsets_and_drifts.tar 2) the extended post-seismic deformation (PSD) time series for GILCREEK/VLBI.     filename: PSD_VLBI.tar 3) the DTRF2020 solution description.     filename: Description_of_DTRF2020_solution_20230920.pdf *The updates/corrections were necessary for the following reasons:* for 1) An incorrect reduction of the published NTL time series by offset and drift. Furthermore, offsets and drifts by which the NTL time series are reduced are now given at the DTRF2020 reference epoch 2010-01-01. for 2) The first epochs of the PSD time series were missing in the GILCREEK PSD file. for 3) The DTRF2020 solution description has been extended by the important information which GNSS satellite and receiver antenna corrections have to be used together with DTRF2020. We have also added a note on the use of mean range biases in case of SLR. * The changes concern:* - Applications that include the NTL time series - GNSS applications that previously used the corrections provided in the IGS antenna correction file igs20.atx for satellite antennas. For reasons of scale consistency, the corrections provided in IGSR3.atx must be used for the satellite antennas instead. The correction for the receiver antennas can be taken either from IGSR3.atx or from the continuously updated file igs20.atx. We thank all our colleagues, who pointed out these issues to us. We apologize for any inconveniences! Best regards, Manuela Seitz in behalf of the DTRF2020 team --------------BA9A639D216FD71F0FD37559
Dear colleagues,

today we re-upload some files provided together with DTRF2020.
Please find the new files in the DTRF2020 release version v2 under the current Zenodo link
https://zenodo.org/record/8220523

The DTRF2020 solution and all other files not commented below remain unchanged.

The updated/corrected files are:
1) non-tidal loading (NTL) time series  referring to CM and CF and the files listing the offsets and trends by which the time series are reduced.
    filenames:
    NTL_{CF|CM}_${technique}_{neu|xyz}.tar
    NTL_{CF|CM}_${technique}_reduced_offsets_and_drifts.tar
2) the extended post-seismic deformation (PSD) time series for GILCREEK/VLBI.
    filename: PSD_VLBI.tar
3) the DTRF2020 solution description.
    filename: Description_of_DTRF2020_solution_20230920.pdf

The updates/corrections were necessary for the following reasons:
for 1) An incorrect reduction of the published NTL time series by offset and drift. Furthermore, offsets and drifts by which the NTL time series are reduced are now given at the DTRF2020 reference epoch 2010-01-01.
for 2) The first epochs of the PSD time series were missing in the GILCREEK PSD file.
for 3) The DTRF2020 solution description has been extended by the important information which GNSS satellite and receiver antenna corrections have to be used together with DTRF2020. We have also added a note on the use of mean range biases in case of SLR.

The changes concern:
- Applications that include the NTL time series
- GNSS applications that previously used the corrections provided in the IGS antenna correction file igs20.atx for satellite antennas.
For reasons of scale consistency, the corrections provided in IGSR3.atx must be used for the satellite antennas instead. The correction for the receiver antennas can be taken either from IGSR3.atx or from the continuously updated file igs20.atx.
 
We thank all our colleagues, who pointed out these issues to us.
We apologize for any inconveniences!

Best regards,
Manuela Seitz in behalf of the DTRF2020 team
--------------BA9A639D216FD71F0FD37559-- Please do not reply directly to this message, but send comments and suggestions to IDS.central.bureau@cls.fr